德国DIAS红外测温成像产品在研发中的应用

Research  development

Non-contact temperature measurement gives you the ability to measure  analyse temperature distributions  profiles of many different materials  components in the R & D process.

Non-contact temperature measurement in high magnetic fields for the research of solid matter

Infrared camera PYROVIEW 640L-PMF for non-contact temperature measurements in a 3T high magnetic field

Infrared temperature measurements in high magnetic fields were  possible for technical reasons until now. The infrared camera PYROVIEW 640L-PMF is the world’s first IR camera that can measure precisely without contact in permanent magnetic fields of several Tesla. In this way technical studies on semiconductors, magnetization measurements, nuclear resonance studies, research work in cell biology as well as the determination of critical parameters of high field  high temperature super conductors can be made for example.

The solution is: Non-contact temperature measurement with the infrared camera PYROVIEW 640L-PMF in high magnetic fields

Printed circuit board testing

IR image/Thermal image of a circuit board – recorded with a PYROVIEW IR camera

During construction process as well as during manufacturing of circuit boards, infrared cameras can be used to visualize thermal behaviour of single component parts. This allows faulty modules to be detected  thermal optimazation to be implemented.

The solution is: Infrared cameras PYROVIEW for printed circuit board testing

Non-destructive testing of materials using an IR camera – Active thermography

Active thermography – Non-destructive tesing of materials with an infrared camera

Hair-line cracks, air inclusions  other manufacturing errors can hardly be detected reliably visual, magnetic  electrodynamic detected in composite materials. The challange are non-destructive testing methods for specifically larger areas.

The solution is: Non-destructive testing of materials using active thermography

Combustion of biomasses – Non-contact temperature measurement in combustion chambers

Use of an infrared camera in a model combustor

The stock of fossil fuels like mineral oil, natural gasonline  carbon is constantly dimishing. At the same time their use causes an increased emission of carbon oxide into the atmosphere. Regional available fuel resources for enegery supply are a good alternative but their combustion conditions  their emission decrease have to be controlled.

The solution is: Use of an infrared camera in a model combustor for analysis  evaluation of firing technological properties of variable, biogenic fuels

Thermography in veterinary medicine

Thermography in the veterinary medicine – measurement of the body temperature of cows with infrared cameras

The challange:Within the framework of a R&D project “VIONA” (“Veterinary Infrared Orientated online Analysis system”) the body temperature rise of animals as an important indicator for the diagnostics of diseases has been studied. It becomes apparent using the example of a milk cow flock with 500 animals that a conventional manual fever measurement would be very costly. This task poses also a challenge to the thermography though the

measurement certainty of the absolute temperature has to be improved of one order magnitude compared to the conventional infrared cameras.

The solution is: Thermography research with infrared cameras PYROVIEW in veterinary medicine

IR sensors for spectroscopy  gas analysis

IR sensors, pyroeletrical detectors  arrays for gas analysis  spectroscopy

For the special requirements of the gas analysis in industrial, environmental  medical technology, pyroelectric sensors with up to four independent spectral channels were developed. In the development of compact spectrometers in the mid-IR region pyroelectric arrays in combination with linear variable filters (LVFS) are advantageous usable, because new  very low priced solutions are possible.